Argox A Series Label Printers
We are sorry to announce that the Argox A Series labellers have been discontinued.
If you have landed on this page looking for the A series then we regret it can no longer be supplied. Please have a look at comporable printers from the Argox range.
A2240

Features & Benefits
- Desktop label printers
- Direct Thermal / Thermal Transfer - prints on most materials
- Centralized printing - for consistent printing and reduced ribbon creasing
- 25.4 ~ 108mm media width - to suit many label or fabric ribbon widths
- Reflective or transmissive sensing - works with standard labels, polyester, vinyl and also apparel tags.
- Ideal for up to 5000 labels /day - suits most batch printing applications
- RS232C, USB serial & Centronics Parallel interface - compatible with most computers
- Ethernet interface option - for network connectivity
- Complete with Application Software & Drivers - ready to install & use
Notes...
- These printers are fully serviceable and we carry a wide range of spares in stock for rapid and low cost repairs.
A Series Specifications
SPECIFICATION | A2240 | A3140 |
Printing System | Centralised, Direct Thermal, Thermal Transfer, Clamshell Straight through path | |
---|---|---|
Case Colour(s) | Light Grey | |
Cutting System | Tear bar, autocutter (option) | |
Media | Direct thermal, or plain media; die cut, continuous roll or fanfold | |
Media width | 25.4 ~ 112mm | |
Print Length | 2540mm | 1270mm |
Roll Diameter | 127mm | |
Media thickness | 0.0635 ~ 0.254mm | |
TT Ribbon | Ribbon Width 1" to 4", Max OD 1.45"(37mm), length max 100m, Core ID 0.5"(13mm) with notch Wax, Wax/Resin or Resin, Outside wound |
|
Resolution | 203 dpi, 8 dots/mm | 300 dpi, 12 dots/mm |
Print width | Max 4 inch (104mm) | |
Printing speed | 127mm/sec | 25~102mm/sec |
Dimensions (WxDxH) | 200 x 245 x 170mm | 201 x 245 x 179mm |
Weight | 2.2kg | |
Controls | Power switch, Push button, 2x LED indicators(Power/Ready) | |
Interfaces | RS232C & USB, Ethernet (option) | |
Memory | 8MB DRAM, 4MB Flash ROM | 8MB DRAM, 8MB Flash ROM |
Flow Control | Hardware or Software (XON/XOFF) | |
Software Emulation | PPLA & PPLB or PPLZ | |
Barcodes Supported | Virtually all 1D & 2D codes supported | |
Sensors | Media gap & black line Reflective sensor x 1 (Movable) & Transmissive semsor x 1(Movable) Center Fixed transmissive / Head open switch / Ribbon end sensor |
|
Power Supply | Universal Switching Power Supply Input: 100V~240V, 1.5A, 50~60Hz, Output: 24VDC, 2.4A | |
Operating temp. | 4 to 38°C | |
Humidity | 0 to 90% | |
Warranty (Note *1) | Printer: 2 years, Printhead: 6 months, Accessories: 3 months Expendable/consumable items eg. roller, belt, ribbon, label, battery, fuses, covers, trigger, cables and power supplies are not covered under this warranty |